HZR light-speed ground plate compactor more phone manufacturers rammer flat performance vibrating plate compactor plate compactor vibratory plates high excitation HZR100 HZR100 site HZR vibration ram HZR100 portable vibration machine is mainly affected by the quality of the exciting force and the excitation frequency. Exciting force is mainly used to maintain the material being compacted forced vibration; and the excitation frequency efficiency and reinforce the impact of consolidating the extent that at the same excitation force, the higher the excitation frequency, reinforce the efficiency and compactness high. Vibrating plate compactor must maintain a certain jump jump height at work, generally between 0.4-0.8mm. Vibrating plate compactor to achieve the same exciting force at the time, plate compactor higher operating frequency, the smaller the vibrating mass it needs, so the lighter its overall quality. However, since most of the plate compactor uses a gasoline engine as a power source, while the gasoline engine can withstand the vibration is limited, so the higher the frequency, the higher the demand of its isolation, so the technical requirements of each component is higher. Technical parameters HZR / HZD80 type HZR / HZD100 type vibration frequency 60HZ 60HZ exciting force 12KN 15KN maximum walking speed 20m / min 20m / min gradeability <20 <20 tamp area 0.18m2 0.21m2 power 5.5-6.5HP / 2.2KW 5.5 -6.5HP / 3KW Total weight 76kg 96kg